Westward Products Ltd.

Pickups and Headers > PW7 Pickup Headers for Combines

PW7 Pickup Header Features:

New header mounting allows the auger to be mounted closer to the feeder chain for better feeding.
Single point hook up for hydraulics, electrical and locking pins.
Left-hand PTO hook-up.
PTO shafts come with radial pin clutch.
Chain tension is adjusted by moving PTO drive, eliminating the chain tension idler.
Replaceable floor panel.
Ultra float suspension system carries and supports pick-up.
Durable polyethylene side safety shield.
Finger timing and auger chain tension can get adjusted without removing side shields.

Specifications	PW7 Pick-Up Header
Header Size	13 ft. (4 m)	15 ft. (4.6 m)
Weight	1,550 lb. (703 kg)	1,600 lb. (726 kg)
Overall Width	171 in. (4343 mm), 192 in. (4877 mm) with clearance lights	190 in. (4826 mm), 211 in. (5359 mm) with clearance lights
Overall Height	45 in. (1143 mm) with clearance lights	45 in. (1143 mm) with clearance lights
Overall Depth	35 in. (889 mm)	35 in. (889 mm)
Header Opening Width	154 in. (3912 mm)	173 in. (4394 mm)
Auger Diameter	24 in. (610 mm)	24 in. (610 mm)
Auger Fingers	0.625 in. (16 mm) induction hardened, 18 - 24 fingers (depending on machine)
Auger Speed	150 - 217 RPM (depending on combine)
Drive Shaft	Heavy duty, fully shielded with built-in clutch

Note: Pick-up headers for all other brands of combines (Case, New Holland, Agco/Massey and CLAAS/Lexion) are sold under their own color and model numbers. See your combine dealer for complete details.

Rake-Up™ Series IV Features

Built to pick more crop, especially in tough conditions.
Built to leave stones behind.
Hydraulically operated crop hold-down.
Standard plastic teeth with optional steel.
New large 20 x 10 – 10 flotation tires.
New wheel height adjustment.
Ultra float suspension.

Specifications	Rake-Up™ Series IV
Size	14 ft. (4.27 m)	16 ft. (4.88 m)
Number of 19 in. Draper Belts	8	9
Actual Picking Width	154 in. (3912 mm)	175 in. (4445 mm)
Mounting Bracket Width	169 in. (4293 mm)	188 in. (4775 mm)
Shipping Weight	1,450 lb. (657.7 kg)	1,600 lb. (725.7 kg)
Overall Width to Edge of Tires	204 in. (5182 mm)	223 in. (5664 mm)

Swathmaster™ Series IV Features:

New features and design for improved performance, reliability and operator convenience.

Front belt rear roller middle support, now standard on the 16' model to greatly reduce belt slippage.
Orbit motor on front belt for direct pull, with self-tightening V-belt drive of rear belt.
New wheel height adjustment and new large 20 x 10 – 10 flotation tires along with ultra float suspension for improved stability, reduced wheel bounce and reduced ground pressure.
Reduced number of grease points.
Draper roller mounting position reduces grain loss and back feeding.
Hydraulically operated crop hold-down.
High quality plastic fingers are standard, steel teeth are optional.

Specifications	Swathmaster™ Series IV
Size	14 ft. (4.27 m)	16 ft. (4.88 m)
Number of 19 in. Draper Belts	8	9
Actual Picking Width	152 in. (3861 mm)	171 in. (4343 mm)
Mounting Bracket Width	163 in. (4140 mm)	182 in. (4623 mm)
Shipping Weight	1,650 lb. (780.4 kg)	1,700 lb. (771.1 kg)
Overall Width to Edge of Tires	190 in. (5826 mm)	209 in. (5309 mm)

Site Design by Infuzion Technologies Ltd