|
Bale Processors >
950 Series Bale Processor |
Jiffy 950 Series Bale Shredders
For Tough
Forage & Commercial Feeding Operations |
 |
- Handles all types
of bales including 4'x4'x8' sqaure bales and even old deformed and rotten
bales
- Load one bale and
carry one
- Load up to 20
small square bales
- Save up to 30% on
feed or bedding
- Improve your feed
quality because it removes a big percentage of the dust from your
older hay
|
|
| A new concept
of shredding hay or straw gives you the advantage of handling any
type of bale in the Jiffy Bale Shredder. The unique rocking tub
design is insensitive to the shape or condition of the bales you
load into the machine.
The Jiffy Bale Shredder will
convert hay and straw to more palatable feed or soft bedding for
your animals. Small square bales, stack bottoms, loose material or
even big square bales are no problem for the
Jiffy Bale Shredder.
A unique loading mechanism firmly
controls all large bales. This
unit requires triple hydraulics to operate. One circuit operates the
cradle, one circuit the loading forks, and one circuit the squeeze
arms. The unit is designed to handle square
bales up to a maximum size of 4' x 4' x 8'. It will also handle any
size of large round bales. The addition of the squeeze arms
permits the unit to load 8' long bales from the end of the bale yet
gently lower the bale into the cradle. |
Specifications:
| Length
(overall) |
198" (5,029
mm) |
| Width
|
119" (3,023 mm) |
| Height
(body only) |
90" (2,286
mm) |
| Tire Size |
31x13.50x15 |
| PTO Size |
1 3/8 - 21 spline
1,000 rpm CV |
| Wheel Track |
96" (2,438
mm) |
| Weight
(empty) |
6,600 lbs.
(2,993 kg) |
| Draw Bar
Weight (empty) |
1,325 lbs.
(601 kg) |
| Hitch Jack |
Heavy duty |
| Hitch |
Adjustable
with heavy duty clevis & Department of Transportation safety
chain |
| Hydraulic
Circuits Required |
3 |
| Chamber
Length |
117" (2,972
mm) |
| Rotor Swing
Diameter |
25 1/8"
(638 mm) |
| No. of
Hammers |
40 |
| Hammer Size |
1/2" x 2"x
5 3/4" (12.7 x 51 x 146 mm) |
| Rotor
Length |
105" (2,667
mm) |
| Min.
Horsepower |
100 HP |
| Optional
Hydraulic Deflector Lift |
Available |
|
- Exclusive rocking
cradle design handles all types of bales.
- Full adjustable
loading forks handle all sizes of bales.
- Simple hydraulic
valving activates cradle rock & speed.
- Easy cradle travel
adjustment.
- Built in PTO shaft
& hydraulic hose storage bracket.
- Optional grain
dispenser discharge control.
|
- Optional
electric deflector lift - Hydraulic lift is also available.
- Optional 20 bu.
grain dispenser with "tuck-under" design for lower center of
gravity.
- Positive hydraulic
hydraulic unloading auger on grain dispenser. Hydraulic motor &
auger discharge may be switched to unload at the front under the
windrow.
- Easy accessibility
to shear pin.
- Unibody frame
construction with high clearance.
- 12.5L - 15
floatation tires on wide stance axle.
- Reinforced parking
jack.
- Fully adjustable
clevis hitch.
- Deflector windrows
or feeds directly into bunks.
|
