Bale Processors > 920 Series Bale Processor
Jiffy 920 Series Bale Shredders
For Tough Applications . . . Including high moisture bales.
 
  • Handles all types of bales up to 80" (2032 mm) round or long including old deformed and rotten bales
  • Load one bale and carry one
  • Load up to 20 small square bales
  • Save up to 30% on feed or bedding
  • Improve your feed quality because it removes a big percentage of the dust from your older hay

 

A new concept of shredding hay or straw gives you the advantage of handling any type of bale in the Jiffy Bale Shredder. The unique rocking tub design is insensitive to the shape or condition of the bales you load into the machine.

The Jiffy Bale Shredder will convert hay and straw to more palatable feed or soft bedding for your animals. Small square bales, stack bottoms, loose material or even big square bales (if divided in half) are no problem for the Jiffy Bale Shredder.

Specifications:
 
Length (overall) 174" (1 879 mm)
Width 118" (2 997 mm)
Height 90" (2 286 mm)
Tires 12.5L x 15
Wheel Track 96" (2 438 mm)
Empty Weight 5105 lb. (2 315 kg)
Draw bar weight 1125 lb. (510 kg)
PTO 1 3/8" - 21 spline 1000rpm CV
Rotor Length 81" (2 057 mm)
Rotor Diameter (operating) 25 1/8" (638 mm)
Hammer Size  1/2" x 2" (12.7 x 50.8 mm)

 

  1. Exclusive rocking cradle design handles all types of bales.
  2. Full adjustable loading forks handle all sizes of bales.
  3. Simple hydraulic valving activates cradle rock & speed.
  4. Easy cradle travel adjustment.
  5. Built in PTO shaft & hydraulic hose storage bracket.
  6. Optional grain dispenser discharge control.
  1. Optional electric deflector lift - Hydraulic lift is also available.
  2. Optional 20 bu. grain dispenser with "tuck-under" design for lower center of gravity.
  3. Positive hydraulic hydraulic unloading auger on grain dispenser. Hydraulic motor & auger discharge may be switched to unload at the front under the windrow.
  4. Easy accessibility to shear pin.
  5. Unibody frame construction with high clearance.
  6. 12.5L - 15 floatation tires on wide stance axle.
  7. Reinforced parking jack.
  8. Fully adjustable clevis hitch.
  9. Deflector windrows or feeds directly into bunks.
3/4" x 1 1/2" edge rolled cradle increases strength by 2.8 times. Infinite hydraulic cradle speed.
Large diameter heavy duty rotor.


 

 

Copyright © 2008 Westward Group of Companies.   All rights reserved.
Westward Parts Services Ltd .      West Country Products Inc .      Westward Products Ltd.


Site Design by
Infuzion Technologies Ltd