Bale Processors > 927 Series Bale Processor
Jiffy 927 Series Bale Shredders - Left Hand Discharge
For Tough Applications . . . Including high moisture hay and straw bales.
 
  • Handles all types of bales up to 72" long including old deformed and rotten bales
  • Load one bale and carry one
  • Load up to 20 small square bales
  • Save up to 30% on feed or bedding
  • Improve your feed quality because it removes a big percentage of the dust from your older hay
  • Access door opposite of discharge for easy twine removal
  • Left hand discharge
   
A new concept of shredding hay or straw gives you the advantage of handling any type of bale in the Jiffy Bale Shredder. The unique rocking tub design is insensitive to the shape or condition of the bales you load into the machine.

The Jiffy Bale Shredder will convert hay and straw to more palatable feed or soft bedding for your animals. Small square bales, stack bottoms, loose material or even big square bales (if divided in half) are no problem for the Jiffy Bale Shredder.

 

Specifications:
 
Length (overall) 193" (4,902 mm)
Width 119" (3,023 mm)
Height  (body only) 98" (2,489 mm)
Tire Size 12.5L x 15"
PTO Size 1 3/8 - 21 spline 1,000 rpm CV
Wheel Track 96" (2,438 mm)
Weight (empty) 5,225 lbs. (2,370 kg)
Draw Bar Weight (empty) 1,190 lbs. (540 kg)
Hitch Jack Heavy duty
Hitch Adjustable with heavy duty clevis & Department of Transportation safety chain
Hydraulic Circuits Required 2
Chamber Length 95" (2,413 mm)
Rotor Swing Diameter 24 1/8" (613 mm)
No. of Hammers 32
Hammer Size 1/2" x 2"x 5 1/4" (12.7 x 51 x 133 mm)
Rotor Length 83" (2,108 mm)
Min. Horsepower 100 HP
Optional Hydraulic Deflector Lift Available
Large Tire Option 31x13.5x15

 

  1. Exclusive rocking cradle design handles all types of bales.
  2. Full adjustable loading forks handle all sizes of bales.
  3. Simple hydraulic valving activates cradle rock & speed.
  4. Easy cradle travel adjustment.
  5. Built in PTO shaft & hydraulic hose storage bracket.
  6. Optional grain dispenser discharge control.

 

  1. Optional electric deflector lift - Hydraulic lift is also available.
  2. Optional 20 bu. grain dispenser with "tuck-under" design for lower center of gravity.
  3. Positive hydraulic hydraulic unloading auger on grain dispenser. Hydraulic motor & auger discharge may be switched to unload at the front under the windrow.
  4. Easy accessibility to shear pin.
  5. Unibody frame construction with high clearance.
  6. 12.5L - 15 floatation tires on wide stance axle.
  7. Reinforced parking jack.
  8. Fully adjustable clevis hitch.
  9. Deflector windrows or feeds directly into bunks.

 

 

Standard deflector lift
assist spring.

Heavy duty hitch jack and
DOT safety chain.
 
 
   
 

 

 

 

   


 

 

Copyright © 2008 Westward Group of Companies.   All rights reserved.
Westward Parts Services Ltd .      West Country Products Inc .      Westward Products Ltd.


Site Design by
Infuzion Technologies Ltd