Windrowers > MacDon 933 Grass Seed Special

Put More Seed In Your Bin

Compatible with:9352c and 9250 SP Windrower tractors.

Why harvest your grass seed with a reconfigured header, when you can harvest with a header that has been specifically designed and factory built for grass seed harvesting? With MacDon’s 933 Grass Seed Special you’ll enjoy clean cutting, uniform windrows and minimum seed loss in a wide variety of grass seeds. That means more seed in your bin and less left in the field.

The 933 comes fully equipped with standard features such as a 6 bat reel, additional stripper bars, special stub guards, an adjustable windrow opening with forming rods and MacDon’s exclusive oil bath wobble box for more efficient power transfer to the sickle. The 933 also comes with manual or optional on-the-go hydraulic guard angle adjustment allowing you to easily switch between close cut and longer stubble cutting lengths.

Of key importance to seed growers is the 933’s hydraulically driven reel speed, which is adjustable on-the-go from the cab. That means you can now exactly match reel speed to crop conditions for gentler handling and more uniform windrow formation, both necessary for minimizing seed loss (specially in delicate crops). Here, crop flow and handling is assisted thanks to the 933’s auger speed which has been optimized for grass seed harvesting.

The 14', 933 features specially designed auger flighting for smoother crop flow.
     
 

MacDon 933 Auger Headers Feature:

 
       
 

MacDon designed wobble box

 
 

Large 24" center feed auger

 
 

Closed rectangular bats

 
 

Optional hydraulic header tilt

 
 

Six-bat reel

 
 

Additional stripper bars

 
 

Special stub guards

 
 

Adjustable windrow opening with forming rods

     
Size / Weight 14' (4.3 m) / 2,900 lb. (1315 kg) 16' (4.9 m) / 3,193 lb. (1451 kg)
Auger Type 24 in. (610 mm) Center Feed
Auger Speed 170 RPM 205 RPM
Reel Type 6 Bat w/ Steel Fingers
Reel Speed 30 - 69 RPM Hydraulic Variable From Cab
Sickle Drive MacDon Dual Oil Bath Wobble Box @ 1,875 SPM or 1,450 SPM
Sickle Type Over-Serrated, Bolt-On Sickle Sections
Guards Stub (Individually Adjustable Hold-Downs)
Guard Angle 8 to 16 Degrees
Swath Opening 68 in. (1724 mm) / 59 in. (1490 mm)
Cutting Range 6 in. (150 mm) Below to 35 in. (900 mm) Above Ground
Field Installed Options Gauge Rollers, Adjustable Skid Shoes, Optimal Hydraulic Header Tilt

Note: Either Gauge Rollers or Adjustable Skid Shoes are required.

 

Click Here For Options


 

 

Copyright © 2008 Westward Group of Companies.   All rights reserved.
Westward Parts Services Ltd .      West Country Products Inc .      Westward Products Ltd.


Site Design by
Infuzion Technologies Ltd