Windrowers

Windrowers > MacDon 900 Series Auger Headers > 912 922 722

922 Auger Header

Engineered For The Rigorous Demands Of High Acreage Farms And Commercial Operations

Compatible with:9352c and 9250 SP Windrower tractors.

A feature-rich step up from the 912, the MacDon 922 has been specially engineered for the rigorous demands of high acreage farms and commercial operations. Its high performance dual sickle drive delivers exceptional cutting power and can be easily switched from high (1,875 SPM) to low (1,450 SPM) speeds by simply interchanging two sheaves. Mid-span reel reinforcements have been added as standard equipment for enhanced reel strength. If you’ve ever wondered how good a hay and forage auger header can be, you owe it to yourself to try the 922.

MacDon 922 Auger Headers Feature:

MacDon designed wobble box
Large 24" center feed auger
Closed rectangular bats
Double heat treated forged steel guards
Dual sickle drive
On-the-go hydraulic reel drive
Optional hydraulic header tilt
Spiral V-Bar hay conditioner rolls
Adjustable swath widths from 3' (0.9 m) to 8' (2.4 m) (with optional fins)
Easy one-person removal of conditioner
Optional double windrow attachment

Hydraulic Reel Drive

We’ve equipped the 922 with a high torque, variable speed hydraulic reel drive which can be adjusted on-the-go from the cab, allowing you to easily achieve uniform crop flow across the cutterbar, through the auger and conditioner rolls.

Size/Weight	14 ft. (4.3 m) / 2,919 lb. (1325 kg)	16 ft. (4.9 m) / 3,212 lb. (1455 kg)	18 ft. (5.5 m) / 3,511 lb. (1595 kg)
Auger Type	24 in. (610 mm) Center Feed
Auger Speed	205 RPM
Reel Type	5 Bat w/ Steel Fingers
Reel Speed	30 - 75 RPM (Hydraulic) Variable From Cab
Sickle Drive	MacDon Dual Oil Bath Wobble Box @ 1,875 SPM or 1,450 SPM
Sickle Type	Over-Serrated, Bolt-On Sickle Sections
Guards	Double Heat-Treated Forged Steel
Guard Angle	8 to 16 Degrees
Swath Opening	60 in. (1524 mm)
Cutting Range	5.9 in. (150 mm) Below to 35.4 in. (900 mm) Above Ground
Field Installed Options	Gauge Rollers, Tall Crop Dividers, Adjustable Skid Shoes, Hay Conditioner, Stub Guard Package, Double Windrower Attachment, Hydraulic Header Tilt, Hydraulic Roll Opener Kit

Note: Either Gauge Rollers or Adjustable Skid Shoes are required.

Options:

	Hydraulic Header Tilt The hydraulic header tilt cylinder allows you to adjust header and guard angles on-the-go from the comfort of the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops.
	Gauge Rollers Gauge rollers are attached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions.
	Stub Guards Stub guards mount directly to the cutterbar to improve the header’s cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground.
	Double Windrow Attachment This attachment allows you to lay a double windrow of conditioned crop.
	Hydraulic Conditioner Roll Opener Avoid leaving the cab to unplug conditioner rolls with this hydraulically powered option for your MacDon auger header 722 Hay Conditioner.

*Other options are available. See your MacDon dealer for details.

Site Design by Infuzion Technologies Ltd

922 Auger Header

Engineered For The Rigorous Demands Of High Acreage Farms And Commercial Operations

MacDon 922 Auger Headers Feature:

Hydraulic Reel Drive

Hydraulic Header Tilt The hydraulic header tilt cylinder allows you to adjust header and guard angles on-the-go from the comfort of the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops.

Gauge Rollers Gauge rollers are attached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions.

Stub Guards Stub guards mount directly to the cutterbar to improve the header’s cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground.

Double Windrow Attachment This attachment allows you to lay a double windrow of conditioned crop.

Hydraulic Conditioner Roll Opener Avoid leaving the cab to unplug conditioner rolls with this hydraulically powered option for your MacDon auger header 722 Hay Conditioner.

Hydraulic Header Tilt
The hydraulic header tilt cylinder allows you to adjust header and guard angles on-the-go from the comfort of the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops.

Gauge Rollers
Gauge rollers are attached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions.

Stub Guards
Stub guards mount directly to the cutterbar to improve the header’s cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground.

Double Windrow Attachment
This attachment allows you to lay a double windrow of conditioned crop.

Hydraulic Conditioner Roll Opener
Avoid leaving the cab to unplug conditioner rolls with this hydraulically powered option for your MacDon auger header 722 Hay Conditioner.