Windrowers

Windrowers > MacDon 900 Series Auger Headers > 912 922 722

912 Auger Header
For Rugged And Reliable Performance

Compatible with:9352c and 9250 SP Windrower tractors.

Our standard auger header, the 912 is a proven performer for farmers looking for 14' cutting width on a header equipped with a single sickle drive. Its high output mechanical reel drive effectively sweeps the cutterbar clean for uniform crop flow. For longer life and lower maintenance, the 912 comes with a 1,450 SPM sickle speed drive. If you seek a reliable header that can stand up to tough harvesting conditions, the 912 will deliver.

MacDon 912 Auger Headers Feature:

MacDon designed wobble box
Large 24" center feed auger
Closed rectangular bats
Double heat treated forged steel guards
Optional hydraulic header tilt
Spiral V-Bar hay conditioner rolls
Adjustable swath widths from 3' (0.9 m) to 8' (2.4 m) (with optional fins)
Easy one-person removal of conditioner
Optional double windrow attachment

Size/Weight	14 ft. (4.3 m) / 2,716 lb. (1232 kg)
Auger Type	24 in. (610 mm) Center Feed
Auger Speed	210 RPM Standard / 186 RPM Optional
Reel Type	5 Bat w/ Steel Fingers
Reel Speed	71 RPM Standard / 63 or 80 RPM Optional
Sickle Drive	MacDon Single Oil Bath Wobble Box @ 1,450 SPM
Sickle Type	Over-Serrated, Bolt-On Sickle Sections
Guards	Double Heat-Treated Forged Steel
Guard Angle	8 to 16 Degrees
Swath Opening	60 in. (1524 mm)
Cutting Range	5.9 in. (150 mm) Below to 35.4 in. (900 mm) Above Ground
Field Installed Options	Gauge Rollers, Tall Crop Dividers, Adjustable Skid Shoes, Hay Conditioner, Stub Guard Package, Double Windrower Attachment, Hydraulic Header Tilt, Hydraulic Roll Opener Kit

Note: Either Gauge Rollers or Adjustable Skid Shoes are required.

Options:

	Hydraulic Header Tilt The hydraulic header tilt cylinder allows you to adjust header and guard angles on-the-go from the comfort of the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops.
	Gauge Rollers Gauge rollers are attached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions.
	Stub Guards Stub guards mount directly to the cutterbar to improve the header’s cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground.
	Double Windrow Attachment This attachment allows you to lay a double windrow of conditioned crop.
	Hydraulic Conditioner Roll Opener Avoid leaving the cab to unplug conditioner rolls with this hydraulically powered option for your MacDon auger header 722 Hay Conditioner.

*Other options are available. See your MacDon dealer for details.

Site Design by Infuzion Technologies Ltd

912 Auger Header For Rugged And Reliable Performance

MacDon 912 Auger Headers Feature:

Hydraulic Header Tilt The hydraulic header tilt cylinder allows you to adjust header and guard angles on-the-go from the comfort of the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops.

Gauge Rollers Gauge rollers are attached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions.

Stub Guards Stub guards mount directly to the cutterbar to improve the header’s cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground.

Double Windrow Attachment This attachment allows you to lay a double windrow of conditioned crop.

Hydraulic Conditioner Roll Opener Avoid leaving the cab to unplug conditioner rolls with this hydraulically powered option for your MacDon auger header 722 Hay Conditioner.

912 Auger Header
For Rugged And Reliable Performance

Hydraulic Header Tilt
The hydraulic header tilt cylinder allows you to adjust header and guard angles on-the-go from the comfort of the cab, enabling you to get the knife and guards closer to the ground for recovery of downed crops.

Gauge Rollers
Gauge rollers are attached behind the cutterbar to reduce wear on the cutterbar wear plate and improve the movement of the header over uneven terrain, as well as in sand or firm soil conditions.

Stub Guards
Stub guards mount directly to the cutterbar to improve the header’s cutting performance in tough, stringy grass type crops, and crops that need to be cut close to the ground.

Double Windrow Attachment
This attachment allows you to lay a double windrow of conditioned crop.

Hydraulic Conditioner Roll Opener
Avoid leaving the cab to unplug conditioner rolls with this hydraulically powered option for your MacDon auger header 722 Hay Conditioner.